Chargepumpoutputimpedance

Alow-costchargepump(liketheMAX1683)operatingwithlow-valued(1µF)capacitorsexhibitsatypicaloutputimpedanceof35Ω,makingitunusableatcurrents ...,ChargepumpregulatorsprovideanexcellentDC/DCconvertersolutionforlow-powerportableapplications,typicallybelow300mAoutputcurrent.Chargepumps ...,2014年11月2日—Chargepumpoutputresistance...Alldiodesare1N4148,theV1sourcecomesfromavoltageregulator,whileCLK1from...

參考資訊如下
5V Auxiliary Power Supply Teams LDO and Charge Pumptt

A low-cost charge pump (like the MAX1683) operating with low-valued (1µF) capacitors exhibits a typical output impedance of 35Ω, making it unusable at currents ...

AN

Charge pump regulators provide an excellent DC/DC converter solution for low-power portable applications, typically below 300mA output current. Charge pumps ...

Charge pump output resistance

2014年11月2日 — Charge pump output resistance ... All diodes are 1N4148, the V1 source comes from a voltage regulator, while CLK1 from an Atmega OSC1 pin (Atmega ...

Design of a Charge Pump Circuit and System with Input ...

由 K Koketsu 著作 · 2021 · 被引用 10 次 — This paper describes a charge pump system for a flexible thermoelectric generator (TEG). Even though the TEG has high-output impedance, the system controls ...

On the Output Impedance and an Output Current

由 T Tanzawa 著作 · 被引用 21 次 — Abstract—This brief shows that the output impedance of. Dickson charge pumps with an arbitrary number of stages.

Properties of the Charge

2001年11月29日 — Output impedance in the splitter scheme is no more than 0.9Ω, which represents a maximum drop of 225mV at full output current. The four high- ...

Pump it up with charge pumps

As long as the output voltage is less than this maximum value, the regulation loop of the charge pump will reduce the output impedance to such a small value ...

The Forgotten Converter

2015年7月3日 — (Figure 4). With an unregulated charge pump, the output voltage droops, based on the load current drawn and the device's output resistance (R.